Serving Nevada Statewide
Seismic Engineer in Nevada
ASCE 7-22 nonstructural anchorage, special seismic certification, and AC156 shake table testing — for Las Vegas, Reno, Henderson, Carson City, and statewide hospitals, data centers, labs, and critical facilities. Stamped by licensed PE/SE engineers.
Licensed Seismic & Structural Engineers for Nevada Projects
Panache Engineering provides PE/SE-stamped seismic engineering for Nevada projects: nonstructural equipment anchorage to ASCE 7-22 Chapter 13, IBC special seismic certification, AC156 shake table test oversight, and distribution system bracing. Nevada sits in a moderate-to-high seismic region — the Reno/Carson corridor in particular — and Clark County and Washoe County plan check both enforce Chapter 13 anchorage documentation for hospitals, data centers, casinos, and resorts.
PE/SE-stamped seismic anchorage calculations to ASCE 7-22 Chapter 13 for mechanical, electrical, and plumbing equipment installed at Nevada hospitals, labs, data centers, and critical facilities. Submittals formatted for Clark County and Washoe County and statewide plan check.
IBC §1705.13 / ASCE 7-22 §13.2.2 special seismic certification for equipment and components that must remain operational after a design earthquake — by analysis, by test, or by experience data.
Test plan development, AC156 required response spectrum (RRS) derivation, and witness/peer review at independent labs. Reports formatted for IBC special seismic certification submittals nationwide.
Seismic bracing layouts for piping, ductwork, conduit, and cable tray per NFPA 13 and SMACNA, plus FEMA E-74 nonstructural risk walkthroughs and prioritized mitigation reports for existing facilities.
Built for Nevada Code Authorities & Project Types
Code authorities we work with
- • Clark County Department of Building & Fire Prevention
- • City of Las Vegas Building & Safety
- • Washoe County / City of Reno Building Services
- • Nevada State Public Works Division (state facilities)
- • Nevada Division of Public and Behavioral Health (healthcare facilities)
Typical Nevada project types
- • Resort, casino, and hospitality MEP equipment anchorage
- • Las Vegas data center UPS, battery, switchgear, and CRAC anchorage
- • Hospital and surgery center equipment special seismic certification
- • Warehouse and distribution center rack and equipment anchorage
- • Reno-area industrial, lithium, and manufacturing plant equipment
- • Sprinkler, duct, and piping seismic bracing per NFPA 13 and SMACNA
Frequently Asked Questions — Nevada Seismic Engineering
What seismic code applies in Nevada?+
Nevada has no statewide building code adoption; each county and city adopts its own edition of the IBC. Clark County and the City of Las Vegas currently enforce the 2018/2021 IBC with local amendments, and Washoe County and Reno enforce the IBC with Nevada amendments. All of them reference ASCE 7 Chapter 13 for nonstructural component anchorage. We confirm the adopted edition per jurisdiction before we start and stamp calculations to that edition.
Is Las Vegas a high seismic area for equipment anchorage?+
Las Vegas is a moderate seismic area, but the Sds values used in Clark County are high enough that most mechanical and electrical equipment still requires engineered anchorage rather than prescriptive attachment. Northern Nevada around Reno and Carson City is substantially more active and typically produces larger Fp demands for the same component.
Do you have a Nevada PE license?+
We work with licensed Nevada professional engineers to stamp deliverables that require a Nevada seal. Tell us the jurisdiction and submittal type when you request a quote and we will confirm the stamping arrangement in writing before work begins.
Can HCAI OSP or OPM preapprovals be used in Nevada?+
Not directly — HCAI OSP and OPM preapprovals are California healthcare instruments. However, the underlying AC156 shake table test reports and analysis behind an OSP are usually acceptable evidence for IBC §1705.13 special seismic certification in Nevada. We routinely repackage existing test data into a Nevada-ready certificate of compliance.
How fast can you turn around a Nevada anchorage package?+
Standard equipment anchorage packages typically turn around in 5–10 business days. Rush schedules are available. Send equipment cut sheets, anchor substrate details, mounting height, and the project Sds and Ip and we will quote scope, fee, and schedule — usually within one business day.
Ready to talk about your Nevada project?
Send us your equipment cut sheets, project location, and required SDS / Ip. You'll get a scope, fee, and schedule from a licensed engineer — typically within one business day.
Office: 150 N Santa Anita Ave, Arcadia, CA 91006 · (626) 698-0784
Seismic anchoring services · AC156 shake table testing · All services