OSP-0074
Siemens
Motor Control Centers – Low Voltage
- OSP Number
- OSP-0074
- Manufacturer
- Siemens
- Sub-Category
- Motor Control Centers – Low Voltage
- Category
- 6. Motor Control Centers
- Expiration
- Expired
- HCAI Document
- View on HCAI
Seismic Parameters (per HCAI certificate)
Certified limit shown exactly as it appears in the certificate field “Special Seismic Certification Valid Up to”. z/h = 1 is the roof level and z/h = 0 is the building base per ASCE 7 §13. Always confirm against the original HCAI certificate before specifying.
Seismic parameters for this OSP could not be read reliably from the HCAI certificate, so no values are shown. See the HCAI certificate for the certified SDS and z/h limits.
Need help with OSP-0074?
PANACHE ENGINEERING provides PE/SE-stamped seismic anchorage calculations, supports & attachments design, and HCAI submittal packages for Siemens motor control centers – low voltage and similar OSP-listed equipment in California hospitals.
Other active OSPs in Motor Control Centers – Low Voltage
- OSP-0006EatonExpires 3/27/2029SDS 2.12gz/h 1.00
- OSP-0052Schneider Electric Square DExpires 8/8/2028
- OSP-0093ABB Inc.Expires 5/15/2031SDS 2.00gz/h 1.00
- OSP-0619EatonExpires 2/26/2032SDS 2.35g
- OSP-0708Eaton Power Distribution & Controls Assemblies DivisionExpires 2/26/2032SDS 1.70g
- OSP-0773Rockwell AutomationExpires 8/24/2029SDS 2.00gz/h 1.00
Need PE/SE-stamped anchorage for Siemens motor control centers – low voltage (Iₚ = 1.5)?
PANACHE ENGINEERING delivers HCAI-ready seismic anchorage calculations, OPM/OSP submittal packages, and shake-table coordination for California hospital construction. Fixed-fee proposals, ASCE 7-22 Chapter 13 compliant, turnaround typically 5–10 business days.