OSP-0166
ThyssenKrupp Elevator
Elevator Controllers
- OSP Number
- OSP-0166
- Manufacturer
- ThyssenKrupp Elevator
- Sub-Category
- Elevator Controllers
- Category
- 2. Elevator Equipment
- Expiration
- 8/18/2028
- HCAI Document
- View on HCAI
Seismic Parameters (per HCAI certificate)
Certified limit shown exactly as it appears in the certificate field “Special Seismic Certification Valid Up to”. z/h = 1 is the roof level and z/h = 0 is the building base per ASCE 7 §13. Always confirm against the original HCAI certificate before specifying.
- Certified valid up to SDS (g)
- 1.50 g
- At z/h
- See HCAI certificate
Certificate-level maximum shown. Applicability to a specific model, mounting configuration, isolation condition, support system, and attachment is governed by the HCAI approval and its attachments. Verify the applicable configuration in the original HCAI certificate before design or specification.
Need help with OSP-0166?
PANACHE ENGINEERING provides PE/SE-stamped seismic anchorage calculations, supports & attachments design, and HCAI submittal packages for ThyssenKrupp Elevator elevator controllers and similar OSP-listed equipment in California hospitals.
Other active OSPs in Elevator Controllers
Need PE/SE-stamped anchorage for ThyssenKrupp Elevator elevator controllers (Iₚ = 1.5)?
PANACHE ENGINEERING delivers HCAI-ready seismic anchorage calculations, OPM/OSP submittal packages, and shake-table coordination for California hospital construction. Fixed-fee proposals, ASCE 7-22 Chapter 13 compliant, turnaround typically 5–10 business days.